Description
The Ampéa 22 Pro is our wall-mounted charger designed for professional use. It delivers 22 kW in three-phase and identifies each user by badge, allowing consumption to be allocated between departments, employees or visitors.
Its MID-certified energy meter provides an enforceable reading, essential for re-invoicing electricity or reimbursing an employee. The charger connects to a supervision tool via the OCPP 1.6 J protocol, over Ethernet or Wi-Fi.
Standard equipment
- RFID badge reader, supplied with five programmed badges
- MID-certified energy meter, readable on the front panel
- OCPP 1.6 J communication via Ethernet or Wi-Fi
- Detection of 6 mA continuous leakage currents
- Dynamic power management between multiple chargers, up to sixteen charging points
- Type 2S socket with shutters and locking
Technical specifications
| Characteristic | Value |
|---|---|
| Maximum power | 22 kW |
| Power supply | Three-phase 400 V, 32 A per phase |
| Socket | Type 2S with shutters, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Metering | MID-certified meter, class B |
| Communication | OCPP 1.6 J, Ethernet RJ45 and Wi-Fi 2.4 GHz |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Warranty | 3 years, extendable to 5 years |
Installation
The charging station can be wall-mounted or installed on a Stabéo Solo stand. It requires a dedicated 10 mm² line protected by the Tutélis Tétra enclosure. Commissioning and supervision setup are carried out by a qualified IRVE installer.





