Description
The Ampéa 11 uses the compact enclosure of the Ampéa 7, adapted for three-phase installations. With 11 kW available, it charges a 60 kWh battery in around six hours, without placing a heavy load on the building’s electrical supply.
This is the model we recommend for apartment buildings: the power demand remains manageable for the communal services distribution board, and the station can be controlled by a shared energy management system.
Key features
- Charging at 16 A per phase on a three-phase supply, delivering 11 kW continuously
- Type 2S socket with shutters and connector locking
- Built-in 6 mA DC leakage current detection
- Control input for off-peak hours or an energy management system
- Operation on a single-phase supply at 3.7 kW is possible if only one phase is connected
Technical specifications
| Characteristic | Value |
|---|---|
| Maximum power | 11 kW |
| Power supply | 400 V three-phase, 16 A per phase |
| Socket | Type 2S with shutters, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Connection cable cross-section | From 2.5 to 10 mm² |
| Warranty | 3 years |
Installation
The station connects to a dedicated circuit protected by a 30 mA residual current device and a four-pole circuit breaker. The Tutélis Tétra enclosure brings these protective devices together, pre-wired. It is rated for 22 kW: by running a 10 mm² cable, you can upgrade to an Ampéa 22 Pro later without modifying the distribution board. As with any station above 3.7 kW, installation must be carried out by an installer with IRVE qualification, in accordance with the NF C 15-100 standard.




