Description
The Ampéa 22 Pro is our wall-mounted charging station for professional use. It delivers 22 kW of three-phase power and identifies each driver by badge, allowing electricity consumption to be allocated between departments, employees or visitors.
Its MID-certified energy meter provides a legally admissible reading, essential for recharging electricity costs or reimbursing an employee. The charging station connects to a management system via the OCPP 1.6 J protocol, over Ethernet or Wi-Fi.
Standard equipment
- RFID badge reader, supplied with five programmed badges
- MID-certified energy meter, readable on the front panel
- OCPP 1.6 J communication via Ethernet or Wi-Fi
- 6 mA DC leakage current detection
- Dynamic power management across multiple charging stations, up to sixteen charging points
- Lockable Type 2S socket with shutters
Technical specifications
| Specification | Value |
|---|---|
| Maximum power | 22 kW |
| Power supply | 400 V three-phase, 32 A per phase |
| Socket | Type 2S with shutters, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Metering | MID-certified meter, class B |
| Communication | OCPP 1.6 J, Ethernet RJ45 and Wi-Fi 2.4 GHz |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Warranty | 3 years, extendable to 5 years |
Installation
The charging station can be mounted on a wall or on a Stabéo Solo pedestal. It requires a dedicated 10 mm² circuit protected by the Tutélis Tétra protection enclosure. Commissioning and monitoring configuration are carried out by an installer with IRVE qualification.

